Tru-Test Electric Fence Security System Manuel d'utilisateur

ENGLISH...2 The En

10 System Operation Indicator lamps You can quickly check the operating status of the electric fence security system by viewing the LED indicator lam

11 Gate Alarm The unit can monitor the gate used to access the area secured by the electric fence. If the gate is opened while the system is armed,

12 Setting the User and Owner PIN numbers On Keypad equipped systems, the User PIN (UPIN) or Owner PIN (OPIN) number must be entered before the unit

13 Troubleshooting General system faults If you encounter a problem with your electric fence security system, first ask your service agent for advice

14 Care and Maintenance While the electric fence security system has been designed to be as maintenance-free as possible, observing the recommendatio

15 Electric Fence Safety Considerations If you are unsure of the meaning of the safety points detailed below, please seek clarification from your ins

16 • Connecting leads that are run inside buildings shall be effectively insulated from the earthed structural parts of the building. This may be ach

17 • Ensure that all mains operated, ancillary equipment connected to the electric security fence circuit provides a degree of isolation between the

2 ENGLISH The Energizer Monitor Unit Congratulations on your recent purchase of an Energizer Monitor Unit electric fence security system. The unit is

3 Which Energizer Monitor Unit do you have? The electric fence security system is based on one of two units, a Premium or a Compact: Premium A Prem

4 Arming and Disarming the Electric Fence Security System Arming the electric fence security system Arm the system when you wish to fully secure the

5 Disarming the electric fence security system Disarming using the Keyswitch Disarm the system in the same way as you arm it. 1 Insert the key into

6 Daytime Fence Monitoring Twenty-four hour fence monitoring can be provided by the unit, even without fully energizing the fence. During the daytim

7 Exiting Monitor mode using the Keypad To exit Monitor mode and return to Standby, enter the UPIN or OPIN, then press : COMMAND KEY1 KEY2 KEY3 KEY

8 Alarm Response If the electric fence security system is breached, it triggers an alarm — the security siren and any auxiliary equipment, such as a

9 Panic Alarm In an emergency, a panic alarm can be raised manually by entering Panic mode. Entering Panic mode Entering Panic mode using the Keypad